Rudder/Tiller Cover

Discuss Jerry Montgomery designed pocket cruiser SAGE 17

Moderator: sal

Post Reply
Posts: 9
Joined: Mon Oct 27, 2014 1:23 pm

Rudder/Tiller Cover

#1 Post by Docdoodle » Sun Jun 05, 2016 12:24 pm

Solved the rudder cover problem thanks to an inventive canvas working friend. The rudder cover has fiberglass rods on top (the aft edge of the rudder when up) and along the open bottom. The cover is closed at the rudder's bottom edge. The rods give enough weight to keep it in place. The canvas covering the rudder post secures with velcro. The separate tiller cover similarly attaches and secures underneath with flaps designed for the tiller clutch. The two-piece set up is easily installed with the bot in the water.

(Sorry - photos attached upside down - couldn't figure out how to rotate them)

John Farnham
"Nature's Girl", S17-23
Lake Mendota, WI
2016-06-05 09.54.55.jpg
2016-06-05 09.54.55.jpg
2016-06-05 09.54.44.jpg

User avatar
Posts: 925
Joined: Mon Jan 03, 2011 4:36 pm
Location: Golden, CO

#2 Post by scoob » Sun Jun 05, 2016 1:10 pm


is the 'canvas friend' willing to become and OEM provider for Sage?
:: Dave Scobie
:: my boat's www-site -

Post Reply