Hull #310, 1984
Customized sail plan
L.O.D 15' 0”, L.W.L 13' 3”, Beam 6' 2”, Sail Area 140 sq. ft.
Draft board up 15”, board down 2' 1/2”
Weight 750 lbs, Ballast 275 lbs, centerboard weight 40 lbs.
The gaff cutter was rated as the best cruising rig for small sailboat by Paul Garthside, John Welsford and Howard Rice in a Small Craft advisor article. They said that if you put a Gaff rig on a modern hull the performance will be supurb. This boat proves that statement.
This boat sails extremely well and won the manufactures cup at the Lake Havasu pocket cruiser convention. I have tested the boat in 35 mph winds on Lake Pleasant with great results – 4.3 knots beating into 3 ft waves in 35 mp winds recorded by the weather bouy.
The boat does not have a compression post which makes for a very comfortable sleeping cabin.
Gaff main (double reefs), staysail and Jib – made by Douglas Fowler. Good condition
roller furling on staysail and jib.
2 anchors, 15lb CQR with 10 ft of chain and 300 ft of line, and a small danforth knock off with 7 ft of chain and 150 ft of line
sail cover for storing/trailering - mainsail, boom and gaff.
2 life jackets, wisker pole, paddle, dock lines
custom 4 inch cusions in cabin
permanent swim ladder
hatch mounted compass
Catalina 22 tiller, orginal available as spare
electrical wiring in place but no battery
icom mast head radio
bow running lights
stern light local AAA batteries
fife rail in lieu of mast cleats
kick up rudder
Original Trailrite trailer (fits in 20 ft garage) with spare tire
good tires and bearings
4 ft extension for trailer
2 hp 1998 Honda long shaft 4 cycle
original motor mount with raised extension for newer long shaft engines
Partial delivery is possible
Listing of Jerry Montgomery designed boats for sale.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest